Dell PowerVault TL2000 Instrukcja Użytkownika Pobierz pdf (Strona 5)

Dell PowerVault™ TL4000/TL2000 Failover Guide

Failover configuration

(one host, one switch, two FC drives)

iliiliilJ

Main Path

Failover Path

Figure 1: Reference Configuration 1

Failover Reference Configuration 2:

One Host with one dual port Fibre Channel HBA, two Fibre Channel switches and one Dell

PowerVault^*^ with two Fibre Channel drives

In this configuration, failover occurs if one of the following occurs:

- One of the drives in the library fails (hardware failure or drive is disconnected from the Fibre

Channel switch)

- One of the switches fails

- One of the HBA ports fails

The physical connection of this configuration is shown in Figure 2.

Important Note: Dell Recommends Fibre Channel drives to be same generation. For Heterogonous

configurations refer to section: Heterogonous Validated Configurations

5|Page 12/31/09version2.0

Always refer to www.dell.comXsupport for latest documentation and updates

1 2 3 4 5 6 7 8 9 10 ... 21 22

Brak uwag

Dell PowerVault TL2000 Instrukcja Użytkownika Strona 5