Dell Alienware Aurora R3 (Early 2011) Instrukcja Użytkownika Pobierz pdf (Strona 12)

5. Connect your computer and all attached devices to electrical outlets, and turn them on.

Removing the Hard-Drive Fan Assembly



1. Follow the instructions in Before You Begin.



2. Remove the left side-panel (see Removing the Left Side-Panel).



3. Open the PCI shroud (see Opening the PCI Shroud).



4. Remove the drive-bay shroud (see Removing the Drive-Bay Shroud).



5. Make note of the hard-drive fan cable routing and then disconnect the hard-drive fan assembly cable from the connector on the master I/O board.



6. Lift the hard-drive fan assembly out of the chassis.

Replacing the Hard-Drive Fan Assembly



1. Follow the instructions in Before You Begin.



2. Push the hard-drive fan assembly into the hard-drive fan assembly bay.



3. Route the cable through the slot in the hard-drive bay and then connect the hard-drive fan assembly cable to the connector on the master I/O board.



4. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud).



5. Close the PCI shroud (see Closing the PCI Shroud).



6. Replace the left side-panel (see Replacing the Left Side-Panel).



7. Connect your computer and all attached devices to electrical outlets, and turn them on.

Removing the PCI-Fan Assembly



1. Follow the instructions in Before You Begin.



2. Remove the left side-panel (see Removing the Left Side-Panel).



3. Open the PCI shroud (see Opening the PCI Shroud).



hard-drive fan assembly cable

hard-drive fan assembly

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

Dell Alienware Aurora R3 (Early 2011) Instrukcja Użytkownika Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Komputery Dell Alienware Aurora R3 (Early 2011)