Dell OptiPlex 360 (Late 2008) Instrukcja Użytkownika Pobierz pdf (Strona 57)

Drives 57

The SATA interface connectors are keyed for correct insertion; that is, a notch

or a missing pin on one connector matches a tab or a filled-in hole on the

other connector.

Optical Drive

Removing an Optical Drive From the Mini Tower Computer

Follow the procedure in "Before Working on Your Computer" on page 9.

Remove the computer cover (see "Removing the Mini Tower Computer

Cover" on page 19).

Remove the drive bezel (see "Removing the Drive Bezel" on page 25).

Disconnect the optical drive data cable from the system board connector.

Disconnect the power cable and the optical drive data cable from the back

of the drive.

Remove the screw securing the optical drive to the optical drive bay.

Slide the optical drive out through the front of the computer.

If you are removing the drive permanently:

Install the drive panel insert (see "Installing an Optical Drive Panel

Insert" on page 59).

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 159 160

Brak uwag

Dell OptiPlex 360 (Late 2008) Instrukcja Użytkownika Strona 57