Dell PowerEdge R610 Dokumentacja Pobierz pdf (Strona 36)

Consolidating multiple SQL Server systems onto

Dell PowerEdge R610 Servers using Microsoft’s Hyper-V

Appendix C. Configuring EqualLogic PS5000 storage

Cabling and storage

Allow at least 5 minutes to connect the two EqualLogic PS5000

arrays to the PowerEdge R610.

1. Connect an Ethernet cable from one of the NIC

ports on the PowerEdge R610 to a GB switch.

2. For each of the EqualLogic PS5000V shelves,

connect the port labeled Ethernet 0 to the switch.

NOTE: If your EqualLogic PS5000 has two controller

modules, be sure to plug the cable into the module with the

green activity light. That is the primary controller. The

module with the amber activity light is the secondary

controller, and the EqualLogic PS5000 restricts its

capabilities.

Installing the Host Integration Tools

To configure the EqualLogic storage, you will need the EqualLogic

Host Integration Tools. We downloaded Host Integration Tools

3.1.2 (64-bit) from

https://www.equallogic.com/secure/login.aspx?ReturnUrl=%2fsupp

ort%2fDefault.aspx

You will need an account to log in.

Make sure that you plug a NIC on your server into the same

network as the arrays. The address for the NIC should be on the

same subnet as the arrays will be.

1. Run the Setup64 executable.

2. On the Welcome screen, click Next.

3. Accept the license agreement. Click Next.

4. On the Installation Type screen, accept the

default of Typical. Click Next.

5. Click Yes when Windows asks if you want to start

the iSCSI Initiator.

6. Click Yes when the installer asks if you want to

start the iSCSI Initiator service and allow iSCSI

traffic through the firewall. Before we can install

the Host Integration Tools, we must configure the

iSCSI Initiator.

7. Close the iSCSI Initiator Properties dialog.

8. You will see a message box saying that Windows

Firewall is running. Leave it up for the moment.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41

Brak uwag

Dell PowerEdge R610 Dokumentacja Strona 36