Dell PowerVault MD3200 Series Instrukcja Właściciela Pobierz pdf (Strona 24)

24 Hardware Installation

Expanding With New PowerVault MD1200 Series Expansion Enclosures

Perform the following steps to attach new PowerVault MD1200 series

expansion enclosures to a PowerVault MD3200 series storage array:

Before adding the expansion enclosure(s), ensure that the storage array

software is installed and is up to date. For more information, see the

Support Matrix

dell.com/support/manuals

Install the software and driver package included on the PowerVault

MD series

resource media.

For information about installing the software, see "Installing

PowerVault MD Storage Software" on page 27.

Set up the PowerVault MD1200 series expansion enclosure(s).

For information about setting up the PowerVault MD1200 series

expansion enclosure(s), see the

Owner’s Manual

dell.com/support/manuals

Using PowerVault MDSM, update the RAID controller module

firmware and NVSRAM to the latest versions available on

dell.com/support

Click

Tools



Upgrade RAID Controller Module Firmware

from the

Enterprise Management Window (EMW).

Stop I/O and turn off the system and attached units:

Stop all I/O to the storage array and turn off affected host systems

attached to the storage array.

Turn off the storage array.

Turn off any expansion enclosure(s) in the affected system.

Cable the expansion enclosure(s) to the storage array.

Turn on attached units:

Turn on the expansion enclosure(s). Wait for the enclosure status

LED to light blue.

Turn on the storage array and wait for the status LED to indicate that

the unit is ready:

• If the status LEDs are solid amber, the storage array is still coming

online.

book.book Page 24 Thursday, July 18, 2013 5:56 PM

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

Brak uwag

Dell PowerVault MD3200 Series Instrukcja Właściciela Strona 24