Dell Studio PP24L Dokumentacja Pobierz pdf (Strona 10)

Back to Contents Page

 Coin-Cell Battery

DellStudio™1435ServiceManual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery



Removing the Coin-Cell Battery



1. Follow the procedures in Before You Begin.



2. Turn the computer over and remove the base cover (see Removing the Base Cover).



3. Remove the center control cover (see Removing the Center Control Cover).



4. Remove the keyboard (see Removing the Keyboard").



5. Remove the palm rest (see Removing the Palm Rest").



6. Disconnect the coin-cell battery cable from the connector on the system board.



7. Remove the coin-cell battery.

Replacing the Coin-Cell Battery



1. Replace the coin-cell battery and connect the coin-cell battery cable to the connector on the system board.



2. Replace the palm rest (see Replacing the Palm Rest).



3. Replace the keyboard (see Replacing the Keyboard).



4. Replace the center control cover (see Replacing the Center Control Cover).



5. Replace the base cover (see Replacing the Base Cover).



6. Slide the battery into the bay until it clicks into place.

Back to Contents Page

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

coin-cell battery

coin-cell battery cable connector

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

Komentarze do niniejszej Instrukcji

Brak uwag

Dell Studio PP24L Dokumentacja Strona 10

Komentarze do niniejszej Instrukcji