Dell Latitude 120L Instrukcja Użytkownika Pobierz pdf (Strona 58)

a. Align the notch in the module edge connector with the tab in the connector slot.

b. Slide the module firmly into the slot at a 45-

degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove

the module and reinstall it.



6. Replace the memory module/Mini PCI cover and tighten the screws.

7. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

8. Turn on the computer.



As the computer boots, it detects the additional memory and automatically updates the system configuration information.



To confirm the amount of memory installed in the computer, click the Start button, click Help and Support, and then click Computer Information.

Wireless Mini PCI Card



If you ordered a Mini PCI card with your computer, the card is already installed.

1. Follow the procedures in Before You Begin.

2. Turn the computer over, loosen the captive screws on the memory module/Mini PCI cover, and then remove the cover.



memory slot notch

memory slot tab

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 103 104

Brak uwag

Dell Latitude 120L Instrukcja Użytkownika Strona 58