Dell LATITUDE E6320 Instrukcja Użytkownika

Dell Latitude E6320 Owner's ManualRegulatory Model: P12SRegulatory Type: P12S001

ขอควรระวัง: ปลดสายเครือขายโดยถอดสายออกจากคอมพิวเตอรกอน แลวจึงถอดสายจากอุปกรณเครือขาย4.ถอดสายโทรศัพทหรือสายเครือขายทั้งหมดออกจากคอมพิวเตอร5.

20. Remove the DC-In bracket from the system.21. Remove the DC-In port from the system.100

Related LinksInstalling The DC-In PortInstalling The DC-In Port1. Replace the DC-In port to its original position in the computer.2. Replace the DC-In

102

27กรอบจอแสดงผลRemoving The Display Bezel1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Starting from the bottom,

Related LinksInstalling The Display BezelInstalling The Display Bezel1. Place the display bezel onto the display assembly.2. Work along to the top and

28แผงจอแสดงผลRemoving The Display Panel1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the display bezel4.

6. Disconnect the Low-Voltage Differential Signaling (LVDS) cable from the display panel.7. Remove the display panel from the display assembly.106

Related LinksInstalling The Display PanelInstalling The Display Panel1. Align the display panel in its original position on the display assembly.2. Co

108

29กลองRemoving The Camera1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the display bezel.4. Remove the

– สำหรับ Windows XP:คลิก Start → Turn Off Computer → Turn Off คอมพิวเตอรจะปดทำงานหลังจากระบบปฏิบัติการปดการทำงานเสร็จสิ้น2. ตรวจสอบวาคอมพิวเตอรแล

7. Remove the camera from the display assembly.Related LinksInstalling The CameraInstalling The Camera1. Place the camera module to its original posit

Related LinksRemoving The Camera111

112

30รายละเอียดทางเทคนิคTechnical SpecificationsNOTE: Offerings may vary by region. The following specifications are only those required by law to ship w

MemoryMinimum memory 2 GBMaximum memory 8 GBAudioType four-channel high definition audioController IDT 92HD90Stereo conversion 24-bit (analog-to-digit

Ports and ConnectorsNetwork adapter one RJ-45 connectorUSB one 4-pin USB 2.0-compliant connector and one eSATA/USB 2.0-compliant connectorMemory card

KeyboardNumber of keys United States: 86 keys, United Kingdom: 87 keys, Brazil: 87 keys, and Japan: 90 keysLayout QWERTY/AZERTY/KanjiTouchpadActive Ar

Battery3-cell and 6-cell (60Wh) approximately 1 hour to 80% capacity and 2 hours to 100% capacityVoltage 11.10 VDCTemperature range:Operating 0 °C to

EnvironmentalTemperature:Operating 0 °C to 35 °C (32 °F to 95 °F)Storage –40 °C to 65 °C (–40 °F to 149 °F)Relative humidity (maximum):Operating 10 %

31การตั้งคาระบบOverviewSystem Setup allows you to:• change the system configuration information after you add, change, or remove any hardware in your

12

GeneralOption DescriptionSystem Information This section lists the primary hardware features of your computer.• System Information• Memory Information

System ConfigurationOption DescriptionNOTE: System Configuration contains options and settings related to integrated system devices. Depending on your

Option DescriptionDefault Setting: COM1SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:• Disabled• ATA

Option DescriptionKeyboard illumination Allows you to configure the keyboard illumination feature. The options are:• Disabled• Level is 25%• Level is

Option DescriptionNOTE: Deleting the admin password automatically deletes the system password and the hard drive password.NOTE: Successful password ch

Option DescriptionOROM Keyboard Access Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The option

Option DescriptionAdmin Setup Lockout Allows you to prevent users from entering Setup when an Administrator password is set.Default Setting: Enable Ad

Power ManagementOption DescriptionAC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connect

Option DescriptionExpressCharge Allows you to enable or disable the ExpressCharge feature. The options are:• Standard• ExpressChargeDefault Setting: E

Option DescriptionFn Key Emulation Allows you to set the option where the <Scroll Lock> key is used to simulate the <Fn> key feature.Defau

2ExpressCardRemoving The ExpressCard1. Follow the procedures in Before Working On Your Computer.2. Press in on the ExpressCard to release it from the

Option Description• WWAN• WLAB• BluetoothDefault Setting: All the options are selected.Wireless Device Enable Allows you to enable or disable the wire

32การวินิจฉัยระบบDevice Status LightsTurns on when you turn on the computer and blinks when the computer is in a power management mode.Turns on when t

Appearance Description Next StepBlinkingSolid Solid Processor error Replace the system board.Solid BlinkingSolid Memory is detected but has errors1. R

Appearance Description Next StepOff BlinkingBlinkingModem error1. Reseat the modem. 2. Replace the modem. 3. Replace the system board.133

134

33การติดตอกับ Dellการติดตอกับ Dellหมายเหตุ: หากไมสามารถเชื่อมตออินเทอรเน็ต สามารถคนหาขอมูลติดตอไดจากใบแจงหนี้ ใบกำกับสินคา บิล หรือแคตาล็อก

Related LinksInstalling the ExpressCardInstalling the ExpressCard1. Slide the ExpressCard into its slot until it clicks into place.2. Follow the proce

3การด SDRemoving The Secure Digital (SD) Card1. Follow the procedures in Before Working On Your Computer.2. Press in on the SD card to release it fro

Related LinksInstalling the Secure Digital (SD) CardInstalling the Secure Digital (SD) Card1. Slide the Secure Digital (SD) card into its slot until i

4แบตเตอรี่Removing The Battery1. Follow the procedures in Before Working On Your Computer.2. Slide the battery latches to unlock the battery.3. Slide

Related LinksInstalling The BatteryInstalling The Battery1. Slide the battery into its slot until it clicks into place.2. Follow the procedures in Aft

5Subscriber Identity Module (SIM) CardRemoving The Subscriber Identity Module (SIM) Card1. Follow the procedures in Before Working On Your Computer.2.

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates

Related LinksInstalling the Subscriber Identity Module (SIM) CardInstalling the Subscriber Identity Module (SIM) Card1. Slide the SIM card into its co

6ฮารดไดรฟRemoving The Hard Drive1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the screws that secure t

5. Remove the screw that secures the hard-drive caddy to the hard drive.6. Pull and remove the hard-drive caddy away from the hard drive.22

Related LinksInstalling The Hard DriveInstalling The Hard Drive1. Attach the hard-drive caddy to the hard drive.2. Tighten the screws to secure the ha

24

7ออพติคอลไดรฟRemoving The Optical Drive1. Follow the procedures in Before Working On Your Computer.2. Press and release the optical drive latch.3. Pu

5. Pull the other side of the optical drive door to release it completely from the optical drive.6. Remove the screw that secures the drive latch to t

7. Remove the drive latch from the optical drive.8. Remove the screws that secures the drive latch bracket to the optical drive.27

9. Remove the drive latch bracket from the optical drive.Related LinksInstalling The Optical DriveInstalling The Optical Drive1. Insert the drive latc

Removing The Optical Drive29

ContentsNotes, Cautions, and Warnings...2บทที่ 1: การทำงานกับสวนประกอบภายในของคอมพิวเต

30

8Base CoverRemoving The Base Cover1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digital (SD)

Related LinksInstalling The Base CoverInstalling The Base Cover1. Place the base cover to align the screw holes correctly with the computer.2. Replace

9เมมโมรี่การดRemoving The Memory1. Follow the procedures in Before Working On Your Computer2. Remove the battery.3. Remove the Secure Digital (SD) ca

Related LinksInstalling The MemoryInstalling The Memory1. Insert the memory module into the memory slot.2. Press the clips to secure the memory module

10ถานกระดุมRemoving The Coin-Cell Battery1. Follow the procedures in Before Working on Your Computer.2. Remove the battery.3. Remove the Secure Digit

Related LinksInstalling The Coin-Cell BatteryInstalling The Coin-Cell Battery1. Place the coin-cell battery in its location.2. Connect the coin-cell b

11การดเครือขายภายในไรสาย (WLAN)Removing The Wireless Local Area Network (WLAN) Card1. Follow the procedures in Before Working On Your Computer.2. R

7. Remove the WLAN card from its slot on the system board.Related LinksInstalling The Wireless Local Area Network (WLAN) CardInstalling The Wireless L

5. Install the Secure Digital (SD) card.6. Install the battery7. Follow the procedures in After Working Inside Your Computer.Related LinksRemoving The

Installing The Optical Drive...28บทที่ 8: Base Cover...

40

12การดเครือขายวงกวางไรสาย (WWAN)Removing The Wireless Wide Area Network (WWAN) Card1. Follow the procedures in Before Working On Your Computer.2.

7. Remove the WWAN card from the computer.Related LinksInstalling The Wireless Wide Area Network (WWAN) CardInstalling The Wireless Wide Area Network

5. Install the Secure Digital (SD) card.6. Install the battery7. Follow the procedures in After Working Inside Your Computer.Related LinksRemoving The

44

13Keyboard TrimRemoving The Keyboard Trim1. Follow the procedures in Before Working On Your Computer.2. Using a plastic scribe, pry under the keyboard

Related LinksInstalling The Keyboard TrimInstalling The Keyboard Trim1. Align the keyboard trim with the keyboard and snap it into place.2. Follow the

14แปนพิมพRemoving The Keyboard1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the keyboard trim.4. Remov

6. Flip the keyboard over and lay it toward the display.7. Lift the clip to release the keyboard cable and disconnect it from the computer.48

8. Remove the keyboard from the computer.9. Remove the tape securing the keyboard cable from the keyboard.49

Removing The Bluetooth Card...57Installing The Bluetooth Card...

10. Disconnect and remove the keyboard cable from the keyboard.Related LinksInstalling The KeyboardInstalling The Keyboard1. Connect the keyboard cabl

6. Install the battery.7. Install the keyboard trim8. Follow the procedures in After Working Inside Your Computer.Related LinksRemoving The Keyboard51

52

15ที่พักมือRemoving The Palmrest Assembly1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digita

– bluetooth– contactless smart card reader– ExpressCard– fingerprint reader12. Remove the screws to release the palmrest assembly from the system boar

Related LinksInstalling The Palmrest AssemblyInstalling The Palmrest Assembly1. Align the palmrest assembly with the computer and snap it into place.2

Related LinksRemoving The Palmrest Assembly56

16การด BluetoothRemoving The Bluetooth Card1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Dig

13. Release and remove the bluetooth cable from the bluetooth card.Related LinksInstalling The Bluetooth CardInstalling The Bluetooth Card1. Connect t

9. Install the base cover.10. Install the optical drive.11. Install the Secure Digital (SD) card.12. Install the battery.13. Follow the procedures in

บทที่ 25: ลำโพง...95Removing The Speakers...

60

17แผง LEDRemoving The LED Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digital (SD) car

13. Remove the LED board from the palm rest assembly.Related LinksInstalling The LED BoardInstalling The LED Board1. Align the LED board on the palmre

4. Install the palmrest assembly.5. Install the keyboard.6. Install the keyboard trim.7. Install the hard drive.8. Install the ExpressCard.9. Install

64

18Smart Card ReaderRemoving The Smart Card Reader1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secur

13. Lift and remove the smart card reader from the computer.Related LinksInstalling The Smart Card ReaderInstalling The Smart Card Reader1. Place the

8. Install the hard drive.9. Install the ExpressCard.10. Install the base cover.11. Install the optical drive.12. Install the Secure Digital (SD) card

68

19Media BoardRemoving The Media Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digital (S

Virtualization Support...129Wireless...

13. Remove the media board from the computer.Related LinksInstalling The Media BoardInstalling The Media Board1. Align the media board to its original

8. Install the ExpressCard.9. Install the base cover.10. Install the optical drive.11. Install the Secure Digital (SD) card.12. Install the battery.13

72

20Display HingesRemoving The Display Hinge Covers1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secur

Related LinksInstalling The Display Hinge CoversInstalling The Display Hinge Covers1. Place the display hinges in the appropriate positions.2. Replace

21ชุดจอแสดงผลRemoving The Display Assembly1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digit

13. Remove the screws that secure the display assembly to the computer.14. Pull out the antenna cables from their routing channels?15. Remove the scre

16. Remove the display cable bracket from the computer.17. Pull the display cable to disconnect it from the system board.77

18. Remove the screw that secures the display assembly to the computer.19. Remove the display assembly from the computer.Related LinksInstalling The D

5. Replace and tighten the screws to secure the display cable bracket to the system board.6. Route the antenna cables through the system board.7. Repl

8

80

22เมนบอรดRemoving The System Board1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digital (SD)

19. Remove the screws that secure the system board to the computer.20. Lift the system board to locate the power supply cable.82

21. Disconnect the power supply cable from the system board.22. Lift and remove the system board from the computer.83

NOTE: Steps 23 and 24 are applicable for computers that shipped in the United States of America.23. Flip the system over and remove the screw that sec

Related LinksInstalling The System BoardInstalling The System Board1. Place the TAA board to its original position.NOTE: Steps 1 and 2 are applicable

17. Install the battery.18. Follow the procedures in After Working Inside Your Computer.Related LinksRemoving The System Board86

23ฮีทซิงคRemoving The Heat-Sink Assembly1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digita

20. Loosen the screws that secure the heat-sink assembly to the system board.21. Remove the heat-sink assembly from the system board.88

Related LinksInstalling The Heat-Sink AssemblyInstalling The Heat-Sink Assembly1. Align the heat-sink assembly to its original position on the system

1การทำงานกับสวนประกอบภายในของคอมพิวเตอรการดำเนินการกับสวนประกอบภายในคอมพิวเตอรปฏิบัติตามคำแนะนำตอไปนี้เพื่อปกปองคอมพิวเตอรจากความเสียหาย และเพื

90

24แผง I/ORemoving The Input/Output Panel1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the Secure Digital

19. Remove the I/O panel from the computer.Related LinksInstalling The Input/Output PanelInstalling The Input/Output Panel1. Replace the I/O panel in

6. Install the keyboard.7. Install the keyboard trim.8. Install the hard drive.9. Install the ExpressCard.10. Install the base cover.11. Install the o

94

25ลำโพงRemoving The Speakers1. Follow the procedures in Before Working On Your Computer.2. Remove the battery.3. Remove the base cover.4. Remove the S

20. Remove the screws that secure the speakers to the computer.21. Remove the speakers from the computer.96

Related LinksInstalling The SpeakersInstalling The Speakers1. Replace the speakers to their original position in the computer.2. Tighten the screws to

98

26พอรต DC-InRemoving The DC-In Port1. Follow the procedures in Before Working on Your Computer.2. Remove the battery.3. Remove the Secure Digital (SD