Dell M1330 Instrukcja Użytkownika Pobierz pdf (Strona 29)



4. Disconnect the antenna cables from the WLAN card.



5. Release the WLAN card by removing the securing screw.



6. Lift the WLAN card out of its system board connector.



Replacing a WLAN Card



1. Insert the WLAN card connector at a 45-degree angle into the system board connector labeled "WLAN."



2. Press the other end of the WLAN card down into the slot on the system board until the card clicks into place.

WLAN

card

M2 x 3-mm securing

screw

antenna cable connectors

(2)

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and

realign the card.

NOTICE: To avoid damage to the WLAN card, never place cables under the card.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

Brak uwag

Dell M1330 Instrukcja Użytkownika Strona 29