Dell S4810-ON Dokumentacja

Dell Networking S4810–Open Networking (ON) Getting Started GuideRegulatory Model: S4810

CAUTION: Grounding conductors must be made of copper. Do not use aluminum conductors.NOTE: Coat the one-hole lug with an anti-oxidant compound prior t

Installing AC Power Supplies1. Remove the PSU from the electro-static bag.2. Use the grab handle to slide the PSU into the switch PSU slot.Figure 4. I

CAUTION: Check the fans at six-month intervals and replace them as necessary. To accurately determine replacement intervals, regularly monitor the spe

AC PowerCAUTION: Ensure that the PSU is installed correctly. The AC power connector must be on the left side of the PSU and the status LED at the top

14

3Technical SpecificationsNOTE: Operate the system at an ambient temperature not higher than 40°C.CAUTION: Lithium Battery Caution: There is a danger o

Parameter SpecificationsMaximum system power input350 Watts (AC)16Technical Specifications

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates

Contents1 About this Guide...52 Install the Hardw

4

1About this GuideThis document is intended as a Quick Start Guide to get new systems up and running and ready for configuration.For complete installat

6

2Install the HardwareBefore installing the switch, verify that you meet these guidelines:• You have enough clearance to the front of the switch so you

Attaching the Mounting BracketsThe S4810–ON is shipped with mounting brackets (rack ears) and the required screws for rack or cabinet installation. Th

• Reverse air flow — To ensure cool air intake and to avoid hot air blow out from the I/O panel, ensure you have the necessary clearance.• Reliable ea