Dell 3-DNS Dokumentacja Pobierz pdf (Strona 41)

Using the Setup Utility

BIG-IP® Reference Guide 2-3

If the alternate network is present on the LAN, 192.168.245.0/24, or if the

node address 192.168.1.245 is in use, then the BIG-IP assigns the alternate

IP address 192.168.245.245 to the internal VLAN instead.

Starting the utility from a web browser

When you start the utility from a web browser, you use the selected default

IP address as the application URL.

To start the Setup utility in a web browser

1. Open a web browser on a workstation connected to the same IP

network as the internal VLAN of the unit.

2. Type the following URL, where <default IP> is the IP address in

use on the BIG-IP internal VLAN.

https://<default IP>

3. At the login prompt, type root for the user name, and default for the

password.

The Configuration Status screen opens.

4. On the Configuration Status screen, click Start Wizard.

5. Fill out each screen using the information from the Setup utility

configuration list. After you complete the Setup utility, the BIG-IP

reboots and uses the new settings you defined

Note

You can rerun the Setup utility from a web browser at any time by clicking

the Setup utility link on the welcome screen.

Starting the utility from the command line

You can run the command line version of the Setup utility from the console

or serial terminal, or from a remote SSH client or from a Telnet client.

To start the Setup utility from the console

1. At the login prompt, type root for the user name, and default for the

password.

2. At the BIG-IP prompt, type the following command to start the

command-line based Setup utility.

config

3. Fill out each screen using the information from the Configuration

worksheet. After you complete the Setup utility, the BIG-IP reboots

and uses the new settings you defined.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 425 426

Brak uwag

Dell 3-DNS Dokumentacja Strona 41