Dell Server Console Switch Podręcznik Użytkownika Pobierz pdf (Strona 18)

18 Installation

www.dell.com | support.dell.com

2 Plug the supplied power cord into the back of the Remote Console Switch unit and then

into an appropriate power source.

3 When the power is switched on, the Power indicator on the rear of the unit will blink for 30

seconds while performing a self-test. Press the <Enter> key to access the main menu.

To configure the Remote Console Switch hardware:

1 You will see the Terminal Applications menu with six options. Select option 1, Network

Configuration.

Figure 2-4. Network Configuration Menu

Select option 1 to set your network speed. Once you enter your selection, you will be

returned to the Network Configuration menu.

3 Select option 2 and specify if you are using a static or DHCP IP address. Dell recommends

using a static IP address for ease of configuration.

4 Select options 3-5 from the Terminal Applications menu, in turn, to finish configuring

your Remote Console Switch for IP address, Netmask, and Default Gateway.

5 Once this is completed, type Ø to return to the main menu.

NOTE: Network configuration can also be performed. See “Basic Operations” on page 25.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Brak uwag

Dell Server Console Switch Podręcznik Użytkownika Strona 18