Dell Data Protection | Encryption Instrukcja Instalacji Pobierz pdf (Strona 17)

Installation Guide 17

HCA Pre-Installation BIOS Configuration

If the following hardware and BIOS instructions are not completed, are inaccurate or are otherwise not met, Personal

Edition ignores HCA policies and software encryption is implemented.

Boot into the BIOS Configuration:

— Press F2 or F12 continuously during boot until a message in the upper right screen says something similar to

“preparing to enter setup” (F2) or “preparing one-time boot menu” (F12).Enter BIOS Administrator password if

prompted.

NOTE: Typically, you will not see this prompt if this is a new computer, since BIOS password has not yet been configured.

If the computer is equipped with legacy HCA, follow this step. Otherwise, skip to Step 4.



Define the BIOS Administrator Password if not already configured:

—Under Settings, click the + (plus) sign next to Security, and then click Admin Password. This step must be

completed before you can create a System (Preboot) password.

— Enter your new Admin password information and click Apply.

If the computer is equipped with legacy HCA, follow this step. Otherwise, skip to Step 4.



Define a System (Preboot) Password if not already configured:

—Click System Password in the same menu.

— Enter your new System Password information and click Apply.

IMPORTANT: Before performing Step 4 and 5, understand that you should never clear TPM or HCA ownership after HCA policies have been

implemented. If you ignore the BIOS warning and clear the TPM or HCA after HCA policies have been implemented, you will

lose access to the encrypted hard drive and must complete a recovery process to regain access.

Clear and activate the TPM:

—Click TPM Security in the same menu.

— Select the option for Clear and click Apply.

— Select the option for Activate and click Apply.

Clear HCA ownership:

—Click Dell Encryption in the same menu.

— Select the Clear Owner check box.

—Click Yes at the warning dialog and then click Apply.

—Click Exit.

NOTE: If the check box is grayed out, it is

Owned

. If the HCA ownership will not clear, select Load Default and then Exit.

If the computer is equipped with legacy HCA, enter the System (Preboot) Password:

— After exiting the BIOS configuration you will be prompted for the

System (Preboot) Password

defined in

Step 3

— HCA pre-installation configuration is complete.

— Log in with local or domain Admin credentials when the computer boots to Windows.

Reset System Password (legacy HCA only)

f the computer is equipped with legacy HCA and

you forget your system password, log in with the BIOS Admin password

and assign a new system password as described in

HCA Pre-Installation BIOS Configuration

. If the BIOS password is also

unknown, you must contact Dell support to reset the passwords (refer to your Welcome Letter for contact information).

Proceed to

Installation Tasks

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 101 102

Komentarze do niniejszej Instrukcji

Brak uwag

Dell Data Protection | Encryption Instrukcja Instalacji Strona 17

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Licencje / aktualizacje oprogramowania Dell Data Protection | Encryption