Dell OpenManage Server Administrator Version 2.3 Instrukcja Użytkownika Pobierz pdf (Strona 154)

154 Using the Storage Management Service

omconfig Format Virtual Disk

Use the following omconfig command syntax to format a virtual disk.

Complete Syntax

omconfig storage vdisk action=format controller=id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these

values, enter omreport storage controller to display the controller IDs and then enter omreport storage

vdisk controller=ID to display the IDs for the virtual disks attached to the controller.

Example Syntax

For example, to format virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=format controller=1 vdisk=4

omconfig Reconfiguring Virtual Disks

You can reconfigure a virtual disk in order to change the virtual disk’s RAID level or increase its size by

adding array disks. On some controllers, you can also remove array disks.

Complete Syntax

omconfig storage vdisk action=reconfigure controller=id vdisk=id

raid=<c| r0| r1| r1c| r5| r10> size=<size> adisk=<ADISK>

Example Syntax

For example, to reconfigure virtual disk 4 to a size of 800 MB, use RAID 5 and array disks 0 through 3 on

connector 0 of controller 1. On a SAS controller, the array disks reside in enclosure 2.

Example for SCSI, SATA, and ATA Controllers:

In this example, enter:

omconfig storage vdisk action=reconfigure controller=1 vdisk=4 raid=

r5 size=800m adisk=0:0,0:1,0:2,0:3

Example for SAS Controllers:

In this example, enter:

omconfig storage vdisk action=reconfigure controller=1 vdisk=4 raid=

r5 size=800m adisk=0:2:0,0:2:1,0:2:2,0:2:3

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 215 216

Brak uwag

Dell OpenManage Server Administrator Version 2.3 Instrukcja Użytkownika Strona 154