Dell Latitude X300 Instrukcja Użytkownika Pobierz pdf (Strona 13)

l If a failure is detected, the computer stops and beeps. To stop the assessment and restart the computer, press <N>; to continue to the next

test, press <Y>; to retest the component that failed, press <R>.

l If failures are detected during the Pre-boot System Assessment, write down the error code(s) and contact Dell before continuing on to the Dell

Diagnostics.



If the Pre-boot System Assessment completes successfully, you receive the message Booting Dell Diagnostic Utility Partition. Press any key to

continue.

6. Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.

7. When the Dell Diagnostics Main Menu appears, select the test you want to run.



Dell Diagnostics Main Menu

1. After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want.



2. If a problem is encountered during a test, a message appears with an error code and a description of the problem. Write down the error code and

problem description and follow the instructions on the screen.



If you cannot resolve the error condition, contact Dell. See your User's Guide or Owner's Manual for contact information.



3. If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in the following table for more information.



4. When the tests are complete, close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the

Main Menu screen.

Back to Contents Page



Option

Function

Express Test

Performs a quick test of devices. This test typically takes 10 to 20 minutes and requires no interaction on your part. Run Express Test first to

increase the possibility of tracing the problem quickly.

Extended

Test

Performs a thorough check of devices. This test typically takes an hour or more and requires you to answer questions periodically.

Custom Test

Tests a specific device. You can customize the tests you want to run.

Symptom

Tree

Lists the most common symptoms encountered and allows you to select a test based on the symptom of the problem you are having.

NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell, technical support will ask for your Service Tag.

Tab

Function

Results

Displays the results of the test and any error conditions encountered.

Errors

Displays error conditions encountered, error codes, and the problem description.

Help

Describes the test and may indicate requirements for running the test.

Configuration

Displays your hardware configuration for the selected device.

The Dell Diagnostics obtains configuration information for all devices from the system setup program, memory, and various internal tests,

and it displays the information in the device list in the left pane of the screen. The device list may not display the names of all the

components installed on your computer or all devices attached to your computer.

Parameters

Allows you to customize the test by changing the test settings.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

Komentarze do niniejszej Instrukcji

Brak uwag

Dell Latitude X300 Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria komunikacja Dell Latitude X300