Dell Inspiron 7500 Instrukcja Użytkownika Pobierz pdf (Strona 122)

This procedure assumes that you have removed the keyboard, thermal shield, and right hinge cover. To remove the 15.4-inch LCD panel (see

Figure 23), perform the following steps:

1. Remove the left hinge cover by removing the screw cover and screw

2. Remove the center cover by removing the three screw covers and screws.

3. Disconnect the LCD wire harness from connector JP3 on the system board.

4. RemovethetwoPhillipsscrewsontheLCDwireharnessontheJP3connector.

Use a dental pick or flat-blade screwdriver to pry up each end of the connector to release it.

5. Close the display.

6. Remove the four 6-mm screws that secure the two hinges to the hinge saddle extensions.

7. Unlatch the display and lift the assembly off the computer base.

Palmrest Component Assembly

Figure 24. Exploded View of Palmrest Assembly

LCD wire harness

Connector JP3

Hinge saddle extensions (2)

Hinges (2)

6-mm screws (4)

Centercover

Left hinge cover

6-mm screws (3)

Screw covers (4)

5-mm screw (1)

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 164 165

Brak uwag

Dell Inspiron 7500 Instrukcja Użytkownika Strona 122