Dell Inspiron 7500 Instrukcja Użytkownika Pobierz pdf (Strona 130)

4. Remove the 10-mm screw and 20-mm screw from the left hinge saddle and remove the saddle.

5. Disconnect the LED cable from connector J6 on the system board.

6. Remove the 6-mm screw from the plastic frame, remove any tape, and remove the plastic frame.

RJ-11 Card Removal

Figure 34. RJ-11 Card Components

4-mm screw

11 card

To remove the RJ-11 card (see Figure 34), perform the following these steps:

1. Remove the 4-mm screw securing the RJ-11 card to the system board.

2. Lift the card off the system board.

System Board Removal

Figure 35. System Board Components



This procedure assumes that you have removed the PC Card heat sink and hinge saddles. To remove the system board (see Figure 35), perform

the following steps:

1. Remove the three 4-mm screws from the bottom of the computer.

2. Remove the system board from the bottom case.

RJ-11 card

4-mm screws (3)

System board

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 164 165

Brak uwag

Dell Inspiron 7500 Instrukcja Użytkownika Strona 130