Dell Label Maker DCSM Instrukcja Użytkownika Pobierz pdf (Strona 39)



Jumper Settings

The jumper locations are shown below.



Removing the System Board



1. Shut down the computer through the Start menu.



2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut

down your computer, turn them off now.



Jumper



Setting



Description

PSWD

(default)

Password features are enabled.

Password features are disabled.

RTCRST

Real-time clock reset.



jumpered unjumpered

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the

computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 54 55

Brak uwag

Dell Label Maker DCSM Instrukcja Użytkownika Strona 39