Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Instrukcja Użytkownika Pobierz pdf (Strona 33)

Configuring Boot From SAN Using iSCSI-Based Dell Storage Arrays

19. Press <ESC> to return to the Main Menu. Select Exit and Save Configuration to exit the NIC/LOM

<Ctrl-S> menu.

20. Press <F4> to save your MBA configuration.

21. Complete the Windows configuration steps in ”Windows Configuration” on page 34.

Configuring Multi-Path I/O for the Intel Adapter

For multi-path boot, you will need two network ports on the server dedicated to iSCSI SAN boot and

two iSCSI SAN IP address assignments. Also, see your iSCSI target array user documentation for

supported redundant path configurations.

1. Turn on or restart the server.

NOTE: If you are not configuring a LOM, skip to step 8.

2. Press <F2> to enter BIOS Setup during POST.

3. Select Integrated Devices and press <Enter>.

4. In the Integrated Devices menu, ensure that the desired additional NIC is set to use the Enabled

with iSCSI Boot setting.

5. Press<ESC> to exit the Integrated Devices menu.

6. Press <ESC> to exit BIOS Setup. The BIOS exit menu appears.

7. Select Save Changes and Exit to exit BIOS Setup.

NOTE: Ensure that all USB flash drives are removed from the system before proceeding.

Page 31

1 2 ... 28 29 30 31 32 33 34 35 36 37

Brak uwag

Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Instrukcja Użytkownika Strona 33