Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Instrukcja Właściciela Strona 34

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 33
Closing the System
1. Lift up the latch on the cover.
2. PlacethecoverontopofthesystemandoffsetthecoverslightlybacksothatitclearsthechassisJhooksandlaysflatonthesystemchassis.See
Figure3-3.
3. LowerthecoverintotheclosedpositionaligningitwiththeJhooksandpushdownonthelatchtoguidethecoverintoplace.
4. Rotate the latch release lock in a clockwise direction to secure the cover.
Cooling Fan Modules
This system contains four cooling fan modules, each comprised of two dual-rotorfans,foratotalofeightfansthatareconnecteddirectlytothesystemboard.
Removing a Cooling Fan Module
1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.
2. Open the system. See Opening and Closing the System.
3. Raise the fan handle, disconnect the module wire harness from the system board, and pull the fan straight up to clear the chassis. See Figure3-4.
4. Unplug the fan module connector.
Figure 3-4. Removing and Installing a Cooling Fan
1
latch
2
latch release lock
3
alignment J hooks
4
chassis tabs
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See
your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against
electrostatic discharge.
NOTE: The procedure for removing each individual fan module is the same.
NOTE: Youcanremovethefanmoduleswithoutremovingthememorycoolingshroud;however,Dell™recommendsthatyouremovethisshroud
beforeremovingafanmodule.Donotremovethesystemboardcoolingshroud.See Removing the Memory Cooling Shroud.
1
cooling fan modules (4)
2
fan module handles
3
module wire harness
4
cooling fan module connector
5
system board cooling shroud
Przeglądanie stron 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 80 81

Komentarze do niniejszej Instrukcji

Brak uwag